Tyre wear is easy to overlook when you’re concentrating on getting to your next appointment or keeping a busy fleet moving. Unlike a puncture, it rarely demands immediate attention. Gradually, though, everyday journeys wear down the rubber that helps your vehicle grip the road.
A regular tread check can help you spot problems early and plan replacements before they disrupt a journey. It’s a straightforward task, whether you drive your own car for work or manage vehicles across a business.
This guide explains how to check tyre tread, the legal requirements for UK cars and light vans, and the warning signs that need professional attention.
What does tyre tread mean?
Tyre tread is the patterned rubber surface around the outside of a tyre. Its grooves help channel water away so the tyre can maintain contact with the road in wet conditions.
As the tread wears down, its ability to disperse water reduces. This can affect wet-weather grip and increase the risk of aquaplaning, where a layer of water separates the tyre from the road surface.
Tread depth is measured in millimetres, from the bottom of the main grooves to the surrounding tread surface. Many new car tyres start with approximately 8mm, although this varies between products.
Depth is only one part of tyre condition. Cuts, bulges and uneven wear also need attention. Our tyre care and maintenance tips explain the other checks to include in your routine.
What is the legal tyre tread limit in the UK?
For cars, light vans and light trailers, the minimum legal tyre tread depth is 1.6mm across the central three-quarters of the tread’s width, continuously around the entire circumference.
Checking one groove in one place is therefore insufficient. A tyre could have adequate tread on its outer section while being excessively worn further in.
Different requirements apply to other vehicle categories, including motorcycles and heavier commercial vehicles. Businesses operating mixed fleets should check the requirements for each vehicle type.
A tyre must also be free from defects that make it unsafe. Meeting the tread depth requirement does not make a damaged tyre roadworthy.
How to check a tyre’s tread depth
Park somewhere safe on firm, level ground, apply the parking brake and switch off the engine. Inspect every road tyre, paying attention to the inner sections as well as the more visible outer edges.
You can assess tread using a depth gauge, a 20p coin or the tyre’s built-in wear indicators.
Using a tyre tread depth gauge
A gauge gives you a measurement in millimetres, making it useful for recording wear and planning replacements. Both digital and analogue versions are available.
Prepare the gauge according to its instructions.
Insert the probe into a main tread groove, avoiding the raised wear indicator bars.
Press the base flat against the surrounding tread.
Read and record the measurement.
Repeat across the central three-quarters of the tread and at several positions around the tyre.
Pay attention to the lowest reading. Deeper tread elsewhere does not compensate for a section below the legal limit.
If you need to move the vehicle to expose another section, stop and secure it again before continuing. Never inspect a tyre while the vehicle is moving.
Checking tyre tread with a 20p coin
If you don’t have a gauge, a 20p coin provides a quick initial check.
Insert the coin into a main tread groove and look at its outer band. If the band is completely hidden, the tread is likely to be above the legal minimum. If any of the band remains visible, arrange a proper measurement and professional assessment.
Repeat this across the required area and around each tyre.
The coin test does not provide an exact measurement or confirm that the whole tyre is legal. If the result is unclear, use a gauge or ask a tyre specialist.
Finding the tread wear indicators
Many car tyres have small raised bars moulded into the main tread grooves. Sidewall markings, sometimes including the letters “TWI”, can help you locate them.
Standard wear bars indicate the 1.6mm limit. When the surrounding tread becomes level with them, the tyre has reached that limit and needs replacing.
Look at several indicators around the tyre. Uneven wear could mean another section has already worn further.
When should I replace my tyres?
Plan replacement before normal driving takes the tread below 1.6mm. If a measurement is approaching the limit, consider your expected mileage rather than assuming the tyre will last until the next service.
Some motoring organisations recommend considering replacement at around 3mm, particularly for wet-weather performance. This is precautionary advice rather than the legal minimum.
Damage can also require action while substantial tread remains. Arrange professional advice if you notice:
Bulges, splits or exposed cords.
Significant cuts or cracking.
Uneven or unusually rapid wear.
Repeated loss of pressure.
New vibration or changes in handling.
If a tyre appears structurally damaged or is below the legal tread limit, do not continue driving on it. Arrange suitable assistance or replacement.
Be particularly alert after hitting a pothole. An impact can damage a tyre or wheel, even if the vehicle initially seems to drive normally. Our guide to poor road conditions and fleet vehicle damage explains the signs to watch for.
How long does the average tyre last?
There is no single lifespan that applies to every tyre. Wear depends on mileage, driving style, vehicle weight, inflation pressure, alignment and road conditions.
A delivery van making frequent stops may wear its tyres differently from a car used mainly for motorway journeys. Low-mileage vehicles also need regular inspections because rubber deteriorates with age.
Michelin recommends professional inspections at least annually after five years of use, and precautionary replacement at ten years from manufacture. Follow your tyre and vehicle manufacturers’ guidance, including any earlier replacement requirements.
You can identify the manufacturing date using the four-digit date code on the sidewall. The first two digits show the week and the last two show the year. For example, “2425” means week 24 of 2025.
Maintaining the correct inflation pressure can help manage wear. Check the manufacturer’s recommended settings and adjust them where specified for heavier loads. Our guide explains how often to check car tyre pressure.
For fleets, recording tread measurements alongside mileage helps identify tyres wearing faster than expected and makes replacement budgets easier to manage.
Tyre tread penalties and consequences
Driving on illegal tyres can lead to a fine of up to £2,500 and three penalty points per tyre. Multiple defective tyres can therefore have serious consequences for your finances and driving licence.
Tyres below the required tread depth can also cause an MOT failure. A valid MOT certificate does not remove your responsibility to keep the vehicle roadworthy between tests.
For businesses, tyre problems can mean missed appointments, delayed deliveries and vehicles being taken out of service unexpectedly. Routine checks provide an opportunity to deal with wear before it causes disruption.
Check tread at least monthly and before long journeys, increasing the frequency where mileage or operating conditions warrant it. Fleet drivers should also follow their employer’s vehicle inspection and defect-reporting procedures.
Building these checks into a wider maintenance routine makes them easier to remember. Our guide to keeping your vehicle in good condition covers other areas that need regular attention.